Clamp Only $65

Silver

Black - 

Bars Only

$40

Honda Ruckus Custom Hub for 4/137 Bolt Pattern

$90


 

This hub has been machined from the 4x140 bolt pattern to the more common 4x137 bolt pattern. The common thing to do is use a 4x137 rim and make it fit by oblonging the bolt holes in the rim to get the rim on the kymco hub but it still dose not fit perfect. The set ring on the hub is bigger than the set ring on the rim making it over lap and possibly be off center.THE MOJO CUSTOMS machined kymco hub fixes this problem. We take a new kymco hub remove the studs, machine down the set ring and re bore new hole for the 4x137 bolt pattern press in new larger wheel studs. and presto you have a kymco hub that will bolt perfect to any 4x137 rim. Lugs are M12x1.5.

Lowered Handlebar Kit

$80

Silver

Black - 


Bars are 7/8 x 25" long and made out of brushed stainless steel and the clamps have a adapter to relocate the speedo and are CNC aluminum so they will NEVER RUST!! Now available in black anodize.

 Includes:

  • 7/8 bars - 25" long
  • Handlebar clamp

 

 

 

 

License Plate Mount

$35

 

 

 

This license plate replicator mount comes with a universal bracket. This bracket has 2 positions to set it and allows you to bolt it to more than one type of motor. The plate mount has 6 different positions to set it combined with the universal bracket and you have 12 different mounting positions this allows you to set it to the exact position you want whether its on a GET motor or a GY6 motor a ZUMA 125 motor and more.

 

Features:

  • Comes in satin black powder coat finish
  • Can be mounted vertical or horizontal
  • Works with GET, GY6 and Zuma 125

Billet CNC Front Hub

$90

 

 

Billet CNC front hub with 220MM brake rotor adapter plate. Fits 12MM axels and both 10" and 12" rims with the 4/90MM bolt pattern.

 

Includes:

  • CNC Front Hub
  • 220MM rotor adapter plate
  • Stainless steel hardware

 

 Adapter Only

$35

 

Mount Page Pic Placeholder

Lowdown Kickstand

$50


 

This kickstand has an internal spring and ball bearing set up with adjustable leg. The spring is held in by a set screw which allows you to adjust tension, grease and rebuild if needed. All the hardware is stainless steel and and the kickstand itself is powder coated black. 



Adjustable Handlebars

$60  

 

 

Adjustable handlebars. They'll fit any seven-eighths handlebar clamp and they're completely adjustable they come in red black or blue


Black

Blue

Red

​Silver

GY6 Short Axle

$20


 

GY6 Short axle is needed anytime you change out the stock axle. This is needed on all GY6 swaps

R6 Tail Light Setup with Mount

$40       Clear

​              Smoke

 

 R6 Led tail light with mount and hardware for Honda Ruckus comes in clear or smoke tint . Depending on your setup you may need resistors to allow the blinkers to blink. Available in Clear and Smoke




R6 Tail Light - Mount Only

$20 shipped 
 Underseat R6 tail light mount. Includes hardware

Stock Wheel Inserts

$40          Front 

​                 Rear

 

 

These rim inserts allow you to have a solid rim look with out having to buy new rims and hubs.
I make them for the stock front and rear rim on the ruckus and the met. inserts come in raw steel and now included the 6 stainless steel bolts and nuts 

For $15.00 each set (there are 2 plates in a set) I can have them powder coated if needed 

Keychain holder

$25

 

 

Keychain holder. Specify which one you want in the notes.

LED Light Bar and Mount

$110


 

 

Looking to get rid of the stock headlight? this is a perfect option.

Mojo Mounts

Front Frame Under Cowling

$200


 

 

 

Add some style to your front frame with Under Cowling. Fiberglass, gel coated and ready to paint.

Underseat Storage Bin

$35

 

 

 

These underseat bins are tig welded, powdercoated black and 100% WATER PROOF!! Will hold your phone or extra tools to keep you going if you break down. Pan Inside Dimensions -- 6-7/8" Long x 4-1/2" Wide x 2" Deep + 1/2" or so deeper including Owners Manual Pocket.

Honda Ruckus

Shorty Rear Sets

$40


So I wanted to make some rear sets for my ruckus that warrant too far back but just enough to be comfortable for me and these are what I came up with. They come powder coated black and they have the longer bolts for install. You'll have to use your own pegs.

Double Crazy Eyes Light Setup


$175

  

Mojo Customs 3 light Crazy Eyes Light Setup.

Each light has 4 CREE LED bulbs and is setup to run low beam high beam and a safety flashing which is activated by turning the light on and off therefore the light will need to be hooked up to a on off switch

Ruckus Lowdown Front Forks


$160



Silver -


Black on Black -


Red on Black -

 

 

Made by Adeline. Same ride height as the RRGS forks

CVT kickstand

for GET and GY6 motor

$50


CVT kickstand works on GET and GY6 they have an internal spring and ball bearing set up and come with the stainless steel Hardware to bolt them up to either motor

Honda Ruckus GY6 Hub

$100 


 

Universal GY6 Hub. Aluminum construction with a steel ring inserted. Multiple pattern design compatible with many aftermarket wheels including 4/110.

Extra Long Throttle Cable

$25

 

 For those super stretch builds don't forget a longer throttle.  

Includes:

  • 83" Long throttle cable for stock carb

 

 Extra Long Brake Cable

$25


 ​For those super stretch builds don't forget a longer brake either. 

Includes:

  • 85" Long brake cable for stock carb

Crazy Eyes Light Setup


$100

 

Mojo Customs 3 light Crazy Eyes Light Setup.

Each light has 4 CREE LED bulbs and is setup to run low beam high beam and a safety flashing which is activated by turning the light on and off therefore the light will need to be hooked up to a on off switch

Ruckus Lowdown Rear Shock


$90



Silver -


Black -


Red on Black -

 

 

Made by Adeline. Same ride height as the RRGS forks